Free browser-based calculators.Back home
%Compound Calculator

Area Calculator

Find the area of common flat shapes with simple measurements.

ResultArea: 96 square units

Rectangle: length x width. Triangle: base x height / 2. Circle: pi x radius squared.

Short answer: Rectangle area is length x width, triangle is half base x height, circle is pi x r squared. An 8 x 5 rectangle is 40 square units; a circle of radius 4 is 50.27.

Area formulas

Shape and sizeArea
Rectangle 8 x 540
Triangle base 10, height 630
Circle radius 450.27
Trapezoid a=6, b=10, h=432
Square side 7.556.25

Formulas: rectangle l x w; triangle 1/2 b h; circle pi r2; trapezoid (a + b) / 2 x h. Units are always squared: metres give square metres.

Square-unit conversions

Squared units convert with the square of the length factor: 1 foot is 0.3048 m, so 1 square foot is 0.3048 squared square metres.

UnitEquivalent
1 m210.7639 ft2
1 ft20.092903 m2
1 acre4,046.86 m2
1 hectare10,000 m2 = 2.471 acres

Composite shapes

Split an L-shaped room into rectangles and add. A 6 x 4 section plus a 3 x 2 section is 30 square units. For a hole, subtract: a 10 x 10 square with a radius-2 circle removed leaves 87.43.

Estimating materials

Flooring or paint is bought by area plus waste. Adding 10% to a 30 square metre room gives 33 square metres to order; check the product's own guidance for the right allowance.

How this calculator works

The form above runs in your browser with the same arithmetic described on this page; nothing you type is sent to a server. Results are rounded for display only, so a long decimal may differ from the last digit of a hand calculation. Empty, zero or non-numeric inputs return a message instead of a result, and division by zero is never evaluated.

Use the tool to check your own working rather than to replace it: write the formula, substitute your numbers, and compare. If the two disagree, look first at units, the order of the inputs and whether a percentage was entered as 5 or as 0.05.

The tables on this page are generated by script from the formulas shown, not typed by hand, and are rebuilt whenever the page is reviewed. The reviewed date above is the date those numbers were last recomputed.

Typical input errors are worth a second look before you rely on a result: a comma used as a decimal separator, a value typed in the wrong unit, or two inputs swapped. If a result looks implausible, test the tool with a case you can do in your head, such as round numbers, and confirm it matches before trying your real figures.

Sources

Related tools

Educational tool. Found an error? Tell us.